Categories    

Scrolling News

Heading One
  

We are the largest Manufacturers & Exporter of Work Gloves and Work Wears Products in Pakistan. 

Beekeeping Products News
  

MUNAN CORPORATION is the largest leading manufacturer cum exporter of Beekeeping Products,

Kindly email us at info@munanco.com for catalog request and pricing on our good quality beekeeping products!

 

Heading September/16/2018
  

MUNAN CORPORATION introducing wide range of Hand & body protective products, Like, Gloves, Suits, Jacket & vests, 

visit below given link for more information

http://munanco.com/products.php?cat=131 



Gloves Guide

Continuous Innovators in Leathers and Textiles Worldwide!
MUNAN Corporation makes over 150 different styles and types of gloves constructed from hundreds of different materials. We receive inquiries from our customers on a regular basis asking which style of gloves is best for the tasks they are performing. We have selected some styles of gloves and have suggested uses for these styles. Some glove styles are not recommended for certain tasks. Although you can wear any style of glove for nearly any job, the performance and durability of the glove will be affected by the task you are performing. We recommend the following glove styles for the

Carpentry
Leather palm gloves
Leather gloves
Chore gloves
Construction (General, Hand Tools)
Leather palm gloves
Leather gloves
Driving (Equipment Operation/Power Tools)
Leather gloves
Deerskin gloves
Goatskin gloves
Farming
Chore gloves
Flannel dotted gloves
Leather gloves
Fencing - Installation & Repair
goatskin gloves
Leather palm gloves
Firewood/Logging
Leather palm gloves
Leather gloves
Fishing
Golden Gripper
Vinyl coated gloves
Jersey knit gloves
Glove Liner
Jersey knit gloves
Gardening - Look for our complete Wells Lamont garden glove line
Goatskin gloves
Silicone gloves
Jersey dotted gloves

 


Landscaping
Leather palm gloves
Leather gloves
Lawn Care
Goatskin gloves
Leather gloves
Jersey dotted gloves
Material Handling
Cardboard/Boxes – Silicone palm gloves
Concrete - Leather palm gloves
Dirt/Sand - Flannel gloves, Jersey gloves
Fruit Picking Jersey knit gloves
Glass - Golden Gripper,
Insulation - No Sweat™ gloves
Lumber - Leather palm gloves
Stone/Rock - Leather palm, Golden Gripper gloves
Warehouse - Jersey gloves
Masonry/Bricklaying
Golden Gripper gloves
Brown jersey gloves
Oil Rigging
Impact Protection Gloves
Ranching
Deerskin gloves
Leather gloves
Washing (Cars, Houses, Household)
Neoprene, latex, nitrile or unsupported gloves
PVC coated gloves

 

Construction
MUNAN Corporation produces a quality pair of gloves, the first factor considered is construction, or cut. The two most common types are Clute and Gunn.

Clute

 

 

 

 

Gunn
Extra comfortable because there are no seams on back. The palm side of the middle two fingers is a separate part of the glove pattern, and is sewn to the palm at the base of the middle two fingers. In full leather and leather palm styles, this seam is reinforced with a welt that gives additional resistance to wear in this critical area.

Cuff Styles
There are a variety of cuff styles to choose from. Most cotton and jersey work gloves have a snug knit wrist (1) while leather gloves have a slip-on or shirred (2) style cuff. Leather palm styles have safety (3)
or gauntlet (4) cuffs, or knit wrists.

Thumb Types
We have two types of thumbs; extra comfortable one-piece keystone (1), one-piece straight thumb (2) with no seam on the outer side, and wing thumb.

 

Fabrics and Leather
We combine leather and cotton for our leather palm gloves.
Leather hides removed from the animal are too thick for commercial uses so they must first be cut into layers. Generally, a hide is divided into three layers.


The smooth outer layer, or grain side, is used for better gloves where "look" and dexterity are important. The bottom layer, the flesh split or suede, is used mostly in leather palm styles, most of which have linings to protect the hands against its roughness. We don't use the middle split because it has no tensile strength.

 

 

LEATHER GRADING
Wells Lamont uses only the finest quality cowhide in our leather gloves. All areas of the hide are graded during cutting, then separated into A, B or C grades. Wells Lamont uses primarily A & B grades in our retail products. Because each hide is unique in size and shape, they must be cut one at a time to yield the highest grade possible. The leather is then matched by color and weight to make the finest consumer presentation.

 

 

SHEEPSKIN
Soft and supple grain sheepskin leather is used in tasks where optimum dexterity and sensitivity are needed.

COWHIDE
Cowhide is most commonly used in our leather gloves. To maintain our consistency while providing a product that is both supple and strong, Wells Lamont uses both side and belly leather. Side split and shoulder split leathers are best for leather palm gloves.

DEERSKIN
Deerskin leather, naturally soft and supple, is also warm and long-wearing. We use the finest quality deerskin in the industry for our work gloves.

NAPA GOAT
Napa Goat, or goatskin, has the highest natural lanolin content available, allowing these gloves to be thin, soft and pliable, while actually improving its durability. Best for medium duty jobs.

 

Now in yout cart : 0 items
Total : $0.00

big_banner